资料下载
×
Force Spectroscopy with the At
消耗积分:3 |
格式:rar |
大小:679 |
2010-08-06
分享资料个
Figure 1. In Force spectroscopy raster-scanning is disabled temporarily or indefi nitely after the tip
positions at a desired in-plane coordinate (X,Y). Then, either the sample or the cantilever (as shown
here) moves in the Z-direction. Typically, an approach half-cycle is followed by a retract half-cycle,
but consecutive half-cycles may have unequal durations and include different offsets in Z.
positions at a desired in-plane coordinate (X,Y). Then, either the sample or the cantilever (as shown
here) moves in the Z-direction. Typically, an approach half-cycle is followed by a retract half-cycle,
but consecutive half-cycles may have unequal durations and include different offsets in Z.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
