资料下载
×
基于四次位移曲线的CNC数控系统的研究
消耗积分:3 |
格式:rar |
大小:333 |
2009-05-16
安立路
分享资料个
摘要：对加减速控制方法在CNC 数控系统中的运用进行了总体介绍。对开发的四次位移曲线
加减速方法数控系统的总体结构进行了介绍，包括硬件和软件部分。然后对加减速在本系统
中的具体应用方法做了说明，并通过一个加工实例，对常见的几种加减速方法进行了验证和
比较。
关键词：加减速控制方法 四次位移曲线加减速方法 CNC 数控系统
中图分类号：TP273.4 文献标识码：A
Based on the displacement curve of four CNC Numerical Control System
1 Teachers Campus,Guangzhou Technology Teachers College, Li Li-bin
2 Guangdong Industry and trade Professional Technology College， Zhao Wen-long
3 guangdong university of technology，Gao-jian
Abstract: To adding the control method reducing the speed, in CNC, the population
having wielded go along in numerical control system introduces that. The population
structure adding the method numerical control system reducing the speed has carried
out the part introducing , including hardware and the software on development four
time of displacement curves. Have been used for and then explanation to the method
applying concretely in adding the system reducing the speed in , have been in progress
and by adding the method reducing the speed one processes an example , face to face
common several kind verifying and comparing.
Keywords: Add the control method reducing the speed Four time of displacement
curves add the method reducing the speed CNC numerical control system
加减速方法数控系统的总体结构进行了介绍，包括硬件和软件部分。然后对加减速在本系统
中的具体应用方法做了说明，并通过一个加工实例，对常见的几种加减速方法进行了验证和
比较。
关键词：加减速控制方法 四次位移曲线加减速方法 CNC 数控系统
中图分类号：TP273.4 文献标识码：A
Based on the displacement curve of four CNC Numerical Control System
1 Teachers Campus,Guangzhou Technology Teachers College, Li Li-bin
2 Guangdong Industry and trade Professional Technology College， Zhao Wen-long
3 guangdong university of technology，Gao-jian
Abstract: To adding the control method reducing the speed, in CNC, the population
having wielded go along in numerical control system introduces that. The population
structure adding the method numerical control system reducing the speed has carried
out the part introducing , including hardware and the software on development four
time of displacement curves. Have been used for and then explanation to the method
applying concretely in adding the system reducing the speed in , have been in progress
and by adding the method reducing the speed one processes an example , face to face
common several kind verifying and comparing.
Keywords: Add the control method reducing the speed Four time of displacement
curves add the method reducing the speed CNC numerical control system
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
