资料下载
×
运用MPC106实现SDRAM系统的设计
消耗积分:5 |
格式:rar |
大小:203 |
2009-06-30
刘满贵
分享资料个
This document discusses the implementation of an SDRAM-based memory system using
the MPC106. To locate any published errata or updates for this document, refer to the website at http://www.motorola.com/SPS/PowerPC/.
Note: High-speed design systems operate at 100 MHz or less. To achieve such a high speed, it necessary to consider each source of possible problems and aggressively pursue solutions. An accurate simulation of the board, taking into account the trace lengths and trace separations, is essential. For designers who are
considering lower-speed memory systems, it is possible to ignore some of these considerations.
the MPC106. To locate any published errata or updates for this document, refer to the website at http://www.motorola.com/SPS/PowerPC/.
Note: High-speed design systems operate at 100 MHz or less. To achieve such a high speed, it necessary to consider each source of possible problems and aggressively pursue solutions. An accurate simulation of the board, taking into account the trace lengths and trace separations, is essential. For designers who are
considering lower-speed memory systems, it is possible to ignore some of these considerations.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
