资料下载
×
一种在LabVIEW中构建高精度软件定时器的方法
消耗积分:5 |
格式:rar |
大小:117 |
2009-07-30
挽你何用
分享资料个
在虚拟仪器软件LabVIEW中提供的定时器的定时精度最小为1毫秒，这样，在定时精度要求更高的场合，这种定时器就不适用了。为此，本文提出一种在LabVIEW中通过它与高级语言接口来调用由C语言编写的高精度定时程序作为定时器来代替LabVIEW所提供的定时器的方法。并在实践中取得了良好的效果。
关键词：LabVIEW ；定时器；虚拟仪器
Abstract:The precision of timer based on the software of virtual instrument –LabVIEW is one millisecond,so ,this kind of timer isn’t suitable to the occasion where the precision of timer is supposed to be very high,for this ,a method by which the timer in LabVIEWE is replaced by a high precision timer program compiled by language c called through the interface offered by LabVIEW is described. Which is proved to be highly effective in practice.
Key words:LabVIEW; timer; Virtual Instruments
关键词：LabVIEW ；定时器；虚拟仪器
Abstract:The precision of timer based on the software of virtual instrument –LabVIEW is one millisecond,so ,this kind of timer isn’t suitable to the occasion where the precision of timer is supposed to be very high,for this ,a method by which the timer in LabVIEWE is replaced by a high precision timer program compiled by language c called through the interface offered by LabVIEW is described. Which is proved to be highly effective in practice.
Key words:LabVIEW; timer; Virtual Instruments
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
