PCB图如下:
Description
NES replacement PSU PCB
Well... Sometimes ago the power rectification unit inside of the RF-Box inside the Nintendo Entertainment System failed. After some hours of troubleshooting I just gave up and got the idea of powering the NES separately which works perfectly. After that I′ve started designing a PCB so now replacing the whole unit is as easy as soldering a couple of wires and assembling this really simple but nice looking PCB
Circuit diagrams and Schematics
Schematic
NES Replacement PSU.pdf
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !