USB Instrument Control Tutorial
This tutorial is meant as a starting point for using NI-VISA to communicate with a USB device. It is not intended as a starting point for learning about USB architecture or the various protocols used in USB communication. After reading this tutorial, you should be able to install a USB device and use NI-VISA to communicate with that device, as long as you understand the device communication protocol.
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !