资料下载
×
Mechanical Characterization of
消耗积分:2 |
格式:rar |
大小:384 |
2010-08-13
安德森大
分享资料个
Introduction
This application note presents the
results of nanomechanical tests in
which an Agilent Nano Indenter G200
was used to measure the Young’s
modulus and hardness of three sol-gel
coatings. The same instrument was also
utilized to perform controlled scratch
tests to evaluate adhesion. The samples
provided for testing are described in
Table 1.
This application note presents the
results of nanomechanical tests in
which an Agilent Nano Indenter G200
was used to measure the Young’s
modulus and hardness of three sol-gel
coatings. The same instrument was also
utilized to perform controlled scratch
tests to evaluate adhesion. The samples
provided for testing are described in
Table 1.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
