Features
• Interfacing Standard PC AT Keyboards
• Requires Only Two I/O Pins. One of them must be an External Interrupt Pin
• No Extra Hardware Required
• Complete Example in C, Implementing a Keyboard to Serial Converter
Introduction
Most microcontrollers requires some kind of a human interface. This application note
describes one way of doing this using a standard PC AT keyboard
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉