资料下载
×
High Linearity Components Simp
消耗积分:3 |
格式:rar |
大小:444 |
2009-09-30
分享资料个
High Linearity Components Simplify Direct Conversion Receiver Designs:A direct conversion radio receiver takes a high frequency
input signal, often in the 800MHz to 3GHz frequency range,
and utilizes one mixer/demodulator stage to convert the
signal to baseband without going through an intermediate
frequency (IF) stage. The resulting low frequency (baseband)
signal spectrum has useful information at frequencies
from DC to typically a few tens of MHz. Designing
these receivers requires the use of very high performance
analog ICs. High performance direct conversion radio
receiver signal chains for applications such as cellular
infrastructure and RFID readers require high linearity,
low noise fi gure (NF), and good matching between the
in-phase and quadrature (I and Q) channels.
input signal, often in the 800MHz to 3GHz frequency range,
and utilizes one mixer/demodulator stage to convert the
signal to baseband without going through an intermediate
frequency (IF) stage. The resulting low frequency (baseband)
signal spectrum has useful information at frequencies
from DC to typically a few tens of MHz. Designing
these receivers requires the use of very high performance
analog ICs. High performance direct conversion radio
receiver signal chains for applications such as cellular
infrastructure and RFID readers require high linearity,
low noise fi gure (NF), and good matching between the
in-phase and quadrature (I and Q) channels.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
