资料下载
×
用L297步进电机控制器与L298N双桥驱动器设计微处理器与
消耗积分:10 |
格式:rar |
大小:187 |
2009-06-01
王秀兰
分享资料个
The L297 Stepper Motor Controller is primarily intendedfor usewith anL298Nor L293Ebridge driver in stepper motor driving applications.
It receives control signals fromthe system’s controller,usually a microcomputer chip, and provides all the necessarydrive signals for the power stage.Additionally,it includestwoPWMchoppercircuits toregulate the current in the motor windings.
It receives control signals fromthe system’s controller,usually a microcomputer chip, and provides all the necessarydrive signals for the power stage.Additionally,it includestwoPWMchoppercircuits toregulate the current in the motor windings.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
