资料下载
×
USB设备控制器IP Core 的设计与实现
消耗积分:2 |
格式:rar |
大小:301 |
2009-08-06
h1654155275.3132
分享资料个
本文介绍一款USB 设备控制器IP CORE 的设计与实现。论文首先介绍了USB 设备控制器的设计原理，模块划分及每个模块的功能。然后介绍了该IP CORE 在ModelsimSE 中的功能仿真及FPGA 验证结果。
关键词：USB 设备控制器 IP Core Verilog FPGA
Abstract: The design and implementation of USB device controller IP core has been described in this article. The design theory of USB device controller is firstly clarified. The block diagram of the design and the function of the block has also been shown. We implemented simulation of the core in ModelsimSE. And the FPGA emulation result has also been elucidated.
Key words: USB device controller IP Core Verilog FPGA
关键词：USB 设备控制器 IP Core Verilog FPGA
Abstract: The design and implementation of USB device controller IP core has been described in this article. The design theory of USB device controller is firstly clarified. The block diagram of the design and the function of the block has also been shown. We implemented simulation of the core in ModelsimSE. And the FPGA emulation result has also been elucidated.
Key words: USB device controller IP Core Verilog FPGA
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
