资料下载
×
TDA8946/TDA8946J pdf datasheet
消耗积分:5 |
格式:rar |
大小:777 |
2008-07-15
分享资料个
1. General description
The TDA8946J is a dual-channel audio power amplifier with an output power of
2 × 15Watan8 Ω load and a 18 V supply. The circuit contains two Bridge Tied Load
(BTL) amplifiers with an all-NPN output stage and standby/mute logic. The TDA8946J
comes in a 17-pin DIL-bent-SIL (DBS) power package. The TDA8946J is
printed-circuit board (PCB) compatible with all other types in the TDA894x family.
One PCB footprint accommodates both the mono and the stereo products.
2. Features
n Few external components
n Fixed gain
n Standby and mute mode
n No on/off switching plops
n Low standby current
n High supply voltage ripple rejection
n Outputs short-circuit protected to ground, supply and across the load
n Thermally protected
n Printed-circuit board compatible.
3. Applications
n Mains fed applications (e.g. TV sound)
n PC audio
n Portable audio.
The TDA8946J is a dual-channel audio power amplifier with an output power of
2 × 15Watan8 Ω load and a 18 V supply. The circuit contains two Bridge Tied Load
(BTL) amplifiers with an all-NPN output stage and standby/mute logic. The TDA8946J
comes in a 17-pin DIL-bent-SIL (DBS) power package. The TDA8946J is
printed-circuit board (PCB) compatible with all other types in the TDA894x family.
One PCB footprint accommodates both the mono and the stereo products.
2. Features
n Few external components
n Fixed gain
n Standby and mute mode
n No on/off switching plops
n Low standby current
n High supply voltage ripple rejection
n Outputs short-circuit protected to ground, supply and across the load
n Thermally protected
n Printed-circuit board compatible.
3. Applications
n Mains fed applications (e.g. TV sound)
n PC audio
n Portable audio.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
