资料下载
×
CD4512BC.pdf
消耗积分:2 |
格式:rar |
大小:122 |
2008-04-02
陆军航空兵
分享资料个
The CD4512BC buffered 8-channel data selector is a complementary
MOS (CMOS) circuit constructed with N- and
P-channel enhancement mode transistors. This data selector
is primarily used as a digital signal multiplexer selecting
1 of 8 inputs and routing the signal to a 3-STATE output. A
high level at the Inhibit input forces a low level at the output.
A high level at the Output Enable (OE) input forces the
output into the 3-STATE condition. Low levels at both the
Inhibit and (OE) inputs allow normal operation.
Features
Wide supply voltage range: 3.0V to 15V
High noise immunity: 0.45 VDD (typ.)
3-STATE output
Low quiescent power dissipation:
0.25 μW/package (typ.) @ VCC = 5.0V
Plug-in replacement for Motorola MC14512
MOS (CMOS) circuit constructed with N- and
P-channel enhancement mode transistors. This data selector
is primarily used as a digital signal multiplexer selecting
1 of 8 inputs and routing the signal to a 3-STATE output. A
high level at the Inhibit input forces a low level at the output.
A high level at the Output Enable (OE) input forces the
output into the 3-STATE condition. Low levels at both the
Inhibit and (OE) inputs allow normal operation.
Features
Wide supply voltage range: 3.0V to 15V
High noise immunity: 0.45 VDD (typ.)
3-STATE output
Low quiescent power dissipation:
0.25 μW/package (typ.) @ VCC = 5.0V
Plug-in replacement for Motorola MC14512
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
