资料下载
×
ADC102S051,pdf datasheet (2 Ch
消耗积分:3 |
格式:rar |
大小:551 |
2009-10-12
刘芳
分享资料个
The ADC102S051 is a low-power, two-channel CMOS 10-bit
analog-to-digital converter with a high-speed serial interface.
Unlike the conventional practice of specifying performance at
a single sample rate only, the ADC102S051 is fully specified
over a sample rate range of 200 ksps to 500 ksps. The converter
is based on a successive-approximation register architecture
with an internal track-and-hold circuit. It can be
configured to accept one or two input signals at inputs IN1
and IN2.
analog-to-digital converter with a high-speed serial interface.
Unlike the conventional practice of specifying performance at
a single sample rate only, the ADC102S051 is fully specified
over a sample rate range of 200 ksps to 500 ksps. The converter
is based on a successive-approximation register architecture
with an internal track-and-hold circuit. It can be
configured to accept one or two input signals at inputs IN1
and IN2.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
