资料下载
SDP-H1用户指南
世态薄凉
分享资料个
Table of Contents
Preface
The SDP-H1 is used as part of the evaluation system for many ADI components. the SDP-H1 board is designed to be used in conjunction with various ADI component evaluation boards as part of a customer evaluation environement.The SDP provides USB connectivity through a USB 2.0 high speed connection to the computer allowing users to evaluate components on this platform from a PC application. The SDP-H1 has a Xilinx(R) Spartan®-6 FPGA and a ADSP-BF527 Blackfin processor. It has an Low Pin Count (LPC) FMC connector and a 120 pin connector identical to that found on the SDP-B and SDP-S.
Links
Getting Started - provides software and hardware installation procedure, PC system requirements and basic board information.
Hardware Description - provides information on the EVAL-SDP-CH1Z components
Schematics - provides schematics and other hardware documents
Product Overview
This board features :
- Xilinx Spartan(R)-6 FPGA
- DDR2
- Micron MT47H32M16Hr-25E:G -8Mb x 16 bits x 4 Banks(512 Mb/64Mb)
- SRAM
- ISSI IS61WV25616BLL-10BLI – 256Kb x 16 bits (4 Mb/512 Kb)
- 1 x 160 pin FMC-LPC Connector (See VITA 57 Specification)
- Samtec ASP-134603-01
- Up to 1,080 Mb/s LVDS
- Single Ended LVCMOS
- Power
- Analog Devices ADSP-BF527 Blackfin processor
- Core performance up to 600 MHz
- 208 -ball CSP-BGA package
- 24 MHz CLKIN oscillator
- 32Mb flash memory
- Numonyx M25P32
- SDRAM memory
- Micron MT48LC16M16A2P-6A - 16 Mb x 16 bits (256 Mb/32 MB)
- 2 x 120-pin small foot print connectors
- Hirose FX8-120P-SV1(91),120 Pin Header
- Blackfin processor peripherals exposed
- SPI
- SPORT
- TWI/I2C
- GPIO
- PPI
- Asynchronous Parallel
For more information, go to The ADI web site.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
- 相关下载
- 相关文章
