资料下载
双通道5千伏隔离器集成DC-DC变换器adum6200/adum6201/adum6202数据表
分享资料个
The ADuM6200/ADuM6201/ADuM62021 are dual-channel digital isolators with isoPower®， an integrated， isolated dc-to-dc converter. Based on the Analog Devices， Inc.， iCoupler® technology， the dc-to-dc converter provides up to 400 mW of regulated， isolated power at either 5.0 V or 3.3 V from a 5.0 V input supply， or at 3.3 V from a 3.3 V supply at the power levels shown in Table 1. These devices eliminate the need for a separate， isolated dc-to-dc converter in low power， isolated designs. The iCoupler chip scale transformer technology is used to isolate the logic signals and for the magnetic components of the dc-to-dc converter. The result is a small form factor， total isolation solution. The ADuM6200/ADuM6201/ADuM6202 isolators provide two independent isolation channels in a variety of channel configurations and data rates （see the Ordering Guide for more information）。 isoPower uses high frequency switching elements to transfer power through its transformer. Special care must be taken during printed circuit board （PCB） layout to meet emissions standards. See the AN-0971 Application Note for board layout recommendations.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
- 相关下载
- 相关文章
