×

AD-FMCOMMS1-EBZ用户指南

消耗积分:2 | 格式:pdf | 大小:76.88KB | 2021-05-22

分享资料个

This version (09 Feb 2021 16:02) was approved by Robin Getz.The Previously approved version (08 Feb 2021 16:21) is available.Diff

AD-FMCOMMS1-EBZ User Guide

Analog Devices uses six designations to inform our customers where a semiconductor product is in its life cycle. From emerging innovations to products which have been in production for twenty years, we understand that insight into life cycle status is important. Device life cycles are tracked on their individual product pages on analog.com, and should always be consulted before making any design decisions.

This particular articl/edocument/design has been retired or deprecated, which means it is no longer maintained or actively updated, even though the devices themselves may be Recommended for New Designs or in Production. This page is here for historical/reference purposes only.

Latest release that was supported was 2016_R1
  1. Introduction
    1. The math behind the RF
    2. I/Q Correction
  2. Quick Start Guides
    Although we do support KC705, and non-Linux designs, our recommended platform is a Zynq based platform to get familiar with the design.
    1. Linux on ZC702, ZC706, ZED
    2. Linux on KC705, VC707
    3. no-OS Drivers
  3. Hardware (including schematics)
    1. Functional Overview
    2. Card specifications
    3. Configuration options
    4. BOM Improvements
  4. Reference HDL Design
    1. Digital Interface Timing Validation
  5. Software
    1. Linux
      1. ML605 (Microblaze)
      2. KC705 (Microblaze)
      3. ZC702, ZC706, ZED
      4. Applications
        1. Command Line/Shell scripts
        2. IIO Scope
        3. fru_dump
        4. xcomm_cal
    2. No-OS drivers
    3. I2C-to-SPI-bridge
  6. Production Testing Process
  7. Additional Documentation about SDR Signal Chains
  8. Help and Support
下载并关注上传者 低至0.43元/天 开通VIP 免费下载

声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉

评论(0)
发评论

下载排行榜

全部0条评论

快来发表一下你的评论吧 !