资料下载
故障容错CAN收发器AMIS41682CANM1G
分享资料个
Description The new AMIS−41682 and AMIS−41683 are interfaces between the protocol controller and the physical wires of the bus lines in a control area network （CAN）。 AMIS−41683 is identical to the AMIS−41682 but has a true 3.3 V digital interface to the CAN controller. The device provides differential transmit capability but will switch in error conditions to a single−wire transmitter and/or receiver. Initially it will be used for low speed applications， up to 125 kB， in passenger cars. Both AMIS−41682 and AMIS−41683 are implemented in I2T100 technology enabling both high−voltage analog circuitry and digital functionality to co−exist on the same chip. These products consolidate the expertise of ON Semiconductor for in−car multiplex transceivers and support together with 0REMX−002−XTP （VAN）， AMIS−30660 and AMIS−30663 （CAN high speed） and AMIS−30600 （LIN） another widely used physical layer.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
- 相关下载
- 相关文章
